|
1. Attach ground radials to ground rod at ground level.
2. Set base over ground rod and radials.
3. Anchor radials at far end with 120-degree spacing.
4. Attach guys and the (2 sloping wires) to top of tower.
5. Raise tower and anchor guys at end of radials.
6. Attach the sloping wires to the end of the radials.
7. Connect the shield of the feed line to the ground rod.
8. Connect the center conductor of feed line to all 3 legs using as short a length of wire as possible.
9. The wires from the tower legs will form a star with the coax center conductor connected at the center
|
